Overview

Made in the USA with American Steel & Labor

• Swiveling pulleys adjust to one of 23 height positions in three-inch increments.
• Chrome-plated columns with laser-cut numbering.
• Offset pull-up bar with wide and neutral grips.
• Aviation-grade cabling.

Description

The Cable Crossover with Adjustable Pulleys is the number one candidate for versatility. The design is incomparable, the construction uncompromising, and the only limit is your imagination. The handles go from the ground to the top of the chrome-plated, laser etched adjustment tube in three-inch increments. There are a total of 23 positions from top to bottom. The sturdy four- by two-inch tubing keeps everything rigid. We’ve added a third workout station to the  Cable Crossover with Adjustable Pulleys by welding a dual-position chin up bar to the center crossmember.

Weight stack information

The Cable Crossover with Adjustable Pulleys comes equipped with two 150-pound weight stacks. Upgrades to 200-pound and 250-pound weight stacks are available. Note that adding weight may decrease the range of motion by up to 10 inches. This machine also features 2:1 pulley reduction. This means that any selected weight will feel lighter by half due to an additional pulley between the user and the weight stack.

NOTE: The feet of all pin select machines now feature 3.5 x 3-inch bolt-down tabs for enhanced safety and stability. The dimensions stated here properly reflect this change, but the bolt-down tabs may not be pictured in the photos above.

We reserve the right to make running changes to products in cases where performance or production processes can be improved. This may result in slight physical differences that may not be reflected in the photographs found here.